A folding work table that adjusts in two directions rather than one. Height moves through seven locked settings from 27.5 inches up to 40.5 inches, released by a foot pedal so the change happens without setting down what is in your hands. Separately, the platform tilts to 0, 25, 50, and 80 degrees, which turns a flat bench into an angled easel for sanding a panel edge-on or presenting a joint at the angle a tool needs to meet it. The tabletop also extends from 12 inches out to 19 inches deep, and at 24 inches wide it takes a workpiece far larger than the folded frame suggests. Eight sliding clamps run along the top, and they are non-marring, so a finished or painted surface is held firmly without the pressure marks steel jaws leave behind. A printed protractor and ruler are set into the surface for laying out angles and lengths without hunting for a separate square. The structure is aluminum and metal, braced by a reinforced triangular arrangement that resists racking when the platform is tilted and loaded, and it carries up to 220 lbs of load. Non-slip foot pads protect the floor and stop the frame sliding under working pressure. Folded, it collapses to 26 by 24 by 11 inches and weighs 31 lbs, so it stands against a wall between jobs. An installation guide is included.
Manufacturer Warranty: 90 Days
Shape: Rectangle
Measurements: Overall Dimensions of Unfolding: 30" X 24" X 27.5"/31"/33"/35"/36"/38.5"/40.5"; Overall Dimension of Folding: 26" X 24" X 11"; Size of Tabletop: 12"-19" X 24"
Maximum Weight Limit: 220 Lbs
Weight (lb.): 34.5 Lb
Assembly: Assembly Required
Base Material: 70% Aluminum, 30% Metal
Care: Wipe Clean With A Damp Cloth; Dry Thoroughly To Prevent Rust
Material: Metal
Country of Origin: Imported
A folding work table that adjusts in two directions rather than one. Height moves through seven locked settings from 27.5 inches up to 40.5 inches, released by a foot pedal so the change happens without setting down what is in your hands. Separately, the platform tilts to 0, 25, 50, and 80 degrees, which turns a flat bench into an angled easel for sanding a panel edge-on or presenting a joint at the angle a tool needs to meet it. The tabletop also extends from 12 inches out to 19 inches deep, and at 24 inches wide it takes a workpiece far larger than the folded frame suggests. Eight sliding clamps run along the top, and they are non-marring, so a finished or painted surface is held firmly without the pressure marks steel jaws leave behind. A printed protractor and ruler are set into the surface for laying out angles and lengths without hunting for a separate square. The structure is aluminum and metal, braced by a reinforced triangular arrangement that resists racking when the platform is tilted and loaded, and it carries up to 220 lbs of load. Non-slip foot pads protect the floor and stop the frame sliding under working pressure. Folded, it collapses to 26 by 24 by 11 inches and weighs 31 lbs, so it stands against a wall between jobs. An installation guide is included.
Manufacturer Warranty: 90 Days
Shape: Rectangle
Measurements: Overall Dimensions of Unfolding: 30" X 24" X 27.5"/31"/33"/35"/36"/38.5"/40.5"; Overall Dimension of Folding: 26" X 24" X 11"; Size of Tabletop: 12"-19" X 24"
Maximum Weight Limit: 220 Lbs
Weight (lb.): 34.5 Lb
Assembly: Assembly Required
Base Material: 70% Aluminum, 30% Metal
Care: Wipe Clean With A Damp Cloth; Dry Thoroughly To Prevent Rust
J. C. Penney Company, Inc. (NYSE: JCP), one of the nation’s largest apparel and home retailers, combines an expansive footprint of over 860 stores across the United States and Puerto Rico to deliver style and value for all hard-working American families. At every touchpoint, customers will discover stylish merchandise at incredible value from an extensive portfolio of private, exclusive and national brands. Reinforcing this shopping experience is the customer service and warrior spirit of approximately 98,000 associates across the globe, all driving toward the Company's mission to help customers find what they love for less time, money and effort.
